Locks and security – FORD 2002 Windstar v.1 User Manual

Page 124

Advertising
background image

Activating/deactivating autolock with the keyless entry system

Before following the activation or deactivation procedures, make sure
that the anti-theft system (if equipped) is not armed, ignition is off, and
all vehicle doors and liftgate window are closed.

1. Enter factory code

2. Press and hold 7/8 control

3. Press and release 3/4 control
while holding 7/8 control

4. Release 7/8 control.

The horn will chirp once if autolock was deactivated or twice (one short
and one long chirp) if autolock was activated.

To re-activate autolock, repeat steps 1–4.

SECURILOCK

ி

PASSIVE ANTI-THEFT SYSTEM

SecuriLock

௢ passive anti-theft system is an engine immobilization

system. This system prevents the engine from being started unless a
coded key programmed to your vehicle is used.

The SecuriLock

௢ passive anti-theft system is not compatible with

non-Ford aftermarket remote start systems. Use of these systems may
result in vehicle starting problems and a loss of security protection.

Automatic arming

The vehicle is armed immediately
after switching the ignition to the 3
(OFF) position. The

THEFT

light in

the instrument cluster will flash
every two seconds when the vehicle
is armed.

1 2

3 4

5 6

7 8

9 0

3

2

1

5

4

Locks and Security

124

Advertising