Driver controls – FORD 2002 Windstar v.1 User Manual

Page 90

Advertising
background image

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)

The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P(Park) position.

Press and hold the rocker control to
adjust accelerator and brake pedal
toward you or away from you.

The adjustment allows for approximately 76 mm (3 inches) of maximum
travel.

Never adjust the accelerator and brake pedal with feet on pedals
or while the vehicle is moving.

SPEED CONTROL (IF EQUIPPED)

If your vehicle is equipped with AdvanceTrac

௢ system, the speed control

will automatically disengage when the road conditions change. When
driving conditions permit you can return to speed control by pressing
RES on the speed control. For more information on the AdvanceTrac

system see AdvanceTrac

Stability Enhancement System section in

the Driving chapter.

To turn speed control on

• Press ON.
Vehicle speed cannot be controlled
until the vehicle is traveling at or
above 48 km/h (30 mph).

Do not shift the gearshift lever
into N (Neutral) with the speed
control on.

Do not use the speed control in heavy traffic or on roads that
are winding, slippery, or unpaved.

OFF

ON

Driver Controls

90

Advertising