FORD 2002 Windstar v.1 - Manual (Page 69)

PANEL DIMMER CONTROL
Use to adjust the brightness of the
instrument panel lighting during
headlamp and parklamp operation.
• Rotate control to full up position
to turn on all interior lights.
• Rotate control to next position
(adjustment dial) and move up
and down to adjust the
instrument panel lights.
• Rotate to the first or second
lower detent position to turn on the instrument panel lights to full
brightness.
This control also has other features that are activated when any door is
opened:
• Rotate to full up position or next position (adjustment dial) to turn on
all interior lights.
• Rotate to first lower detent position to activate “sleeping baby
mode”— dome lamps will remain off and only the lower lamps will
illuminate.
• The second lower detent position (full down) will shut off all interior
lights.
The dome lamp will not illuminate if the control switch is in the OFF
position.
AIMING THE HEADLAMPS
The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident the alignment of your headlamps
should be checked by a qualified service technician.
You will need one E8 Torx socket to make the adjustments.
Lights
69