Maintenance and specifications – FORD 2002 Windstar v.1 User Manual
Page 280
Item
Ford part
name
Ford part
number
Ford
specification
Automatic
transaxle
(4F50N)
Motorcraft
MERCON
V
ATF
2
XT-5-QM
MERCON
V
Disc brake
caliper rails
Motorcraft
Silicone Brake
Caliper Grease
and Dielectric
Compound
XG-3
ESE-M1C171-A
Constant
velocity joints
Motorcraft CV
Joint Grease
(High Temp.)
XG-2
ESP-M1C207-A
Windshield
washer fluid
Ultra-clear
Windshield
Washer
Concentrate
C9AZ-19550-AC
ESR-M17P5-A
1
Use only brake fluids certified to meet Ford specifications. DOT 3 fluid
is recommended. However, if DOT 3 is not available, DOT 4 fluid can be
used.
2
Ensure the correct automatic transmission fluid is used MERCON
and
MERCON
V are not interchangeable. DO NOT MIX MERCON and
MERCON
V. Refer to the scheduled maintenance guide to determine the
correct service interval.
ENGINE DATA
Engine
3.8L OHV V6 engine
Cubic inches
232
Required fuel
87 octane
Firing order
1-4-2-5-3-6
Spark plug gap
1.3-1.4 mm (0.052-0.056 inch)
Ignition system
EDIS
Compression ratio
9.36:1
Maintenance and Specifications
280