Hudson Robotics LabLinx - Manual (Page 18)

StackLink User Manual Hudson Robotics, Inc.
14
Click on the ‘Edit Plate’ button to change the parameters of a previously defined plate, or
click on ‘New Plate’ to create a new plate definition. Then, the following form will be
displayed:
Figure 14

HINT: The only parameter value important to the StackLink is:
StackLink Delay (msec)
 The delay time (in milliseconds) it takes the Plate Seats to close after the stack
elevator begins to descend.
 This is used when using microplates with special extrusions that may interfere
with dispensing.