Hudson Robotics PlateCrane EX - Manual (Page 29)

PlateCrane EX User Manual Hudson Robotics, Inc.
25
Once the workcell is defined follow the help tool, by left clicking on the help icon, to
create your method or contact Hudson Robotics for technical support.
3. Setting up Plate Parameters
Entering correct dimensions for the plates you will be using is critical for the proper
handling of those plates by the PlateCrane, as it automatically adjusts its positions for
each different plate-type used in every method based solely on the information entered
into that plate’s definition.
While not running a method, the user may right click on the ‘Plates’ Plug-in located in
the left toolbox in your protocol editor.