ITC Hemochron Response Whole Blood Coagulation System - Manual (Page 18)

18
RESULTS MANAGEMENT
Up to ten (10) RxDx cases can be contained on a HEMOCHRON Response with an activated HEMOCHRON
RxDx Analysis Module.
Note: If a new case is started on a system already containing ten cases, a warning prompt is
displayed that the case that has been inactive the longest will be deleted if the operator elects to
proceed.
Reviewing Information for the Active RxDx Case
1.
Display the RxDx System screen.
2.
Press 5 to display the View screen:
3.
Press 1 to display the record for the current patient:
Note: To display the next page of the record, press the 0 key. To display the previous page,
press the 9 key. To print the record, press the PRINT key.
4.
Press YES, CANCEL or NO to cancel display of the information and return to the RxDx System
screen.
Reviewing Information for Stored RxDx Cases
1.
Display the RxDx System screen.
2.
Press 5 to display the View screen.
3.
Press 2 to view the Case List:
Note: DONE designates a closed case in the Case List.
4.
Press the numeral key (use 0 for the number 10) for a case to view information for that case.