ITC Hemochron Response Whole Blood Coagulation System User Manual
Page 6
6
ATTENTION LABEL
An attention label on the rear of the HEMOCHRON Response instrument alerts users to accompanying
documentation:
Before using the HEMOCHRON Response instrument, it is essential that the contents of this Operator’s
Manual are read and understood by the operator.
Handle and open the container with care.
GETTING STARTED
RxDx Analysis Module software is loaded onto the HEMOCHRON Response during manufacture. The
software must be activated before it can be used.
Activating RxDx Analysis Module Software
1.
Obtain the serial number of the HEMOCHRON Response, software version 2.00 and above, on which
the RxDx Analysis Module software is to be activated.
Note: The serial number is printed on the label at the rear of the instrument.
2.
Contact ITC Customer Service (phone: 800-631-5945 or 732-548-5700, or via fax: 732-248-1928) to
obtain the activation code (serial number specific) for the system.
3.
Press MENU to display the first page of the main menu.
4.
Press 1 to display the ID Selections.
5.
Press 4 to display the RxDx System screen:
6.
Enter up to a nine-digit code.
Note: The code may be entered with or without leading zeros.
7.
Press YES to complete the activation.
8.
RxDx system default settings can be configured in the Supervisor menu. Refer to SETTING
SUPERVISOR OPTIONS below for instructions.
Note: Refer to the HEMOCHRON Response Operator's Manual for complete operating
instructions. Refer to the Setting Configuration Options and Setting Supervisor Options
sections of the HEMOCHRON Response Operator's Manual for instructions to enter the correct
date and time and to configure the instrument.