ITC Hemochron Response Whole Blood Coagulation System - Manual (Page 20)

20
REPORTS
Data from an RxDx case that was run on the HEMOCHRON Response can be retrieved and reported at any
time.
Seven RxDx reports are available:
Report Description
Patient Record All information for the case.
Bolus Heparin Dose Bolus heparin dose calculated and given, plus information used
in the calculation.
Additional Heparin Dose Additional heparin dose calculated and given, plus information
used in the calculation.
Total Heparin Given Total heparin calculated and given, plus information used in the
calculation.
Protamine Dose Protamine dose calculated and given, plus heparin level and
information used in the calculation.
HiTT Results of the HiTT test and circulating heparin level.
PDA-O Results of the post-procedure PDA-O test, plus protamine dose
(if any), heparin level, and information used in the calculation.
Each of the seven types of reports contains the same information in the report header:
• OID
• PID
• Case Starting Date
• Case Starting Time
• Patient Height
• Patient Weight
• Patient Gender
• Patient Blood Volume
An example of a Total Heparin Given report is shown below:
T o t a l H e p a r i n G i v e n
O p e r I D = 9 8 7 5
P a t I D = 1 2 3 4 5 6 7 8 9
D a t e = 1 2 / 1 2 / 2 0 0 3
T i m
e = 1 2 : 5 5
H e i g h t = 1 . 6 m
W e i g h t = 1 0 0 k g
G e n d e r = F e m a l e
B l o o d V o l = 3 5 0 0 m l
B o l u s D o s e = 4 , 0 0 0 u
P u m p H e p = 5 , 0 0 0 u
A d d l H e p = 5 , 0 0 0 u
T o t H e p G i v = 3 5 , 2 0 0 u
#
U s e r S e l e c t e d
Note: On all reports, a pound symbol (#) appears next to any manual entry and a tilde (~)
appears after any calculated result based on a manual entry.