CITIZEN CBM-270 User Manual
Page 17
CBM-270 User’s Manual
CITIZEN
17
2222....2222
B
B
B
Baaaassssiiiic
c
c
c S
SSSppppeeeecccciiiiffffiiiiccccaaaattttiiiioooonnnnssss
Model
Item
CBM-270-RF120-*
CBM-270-PF120-*
CBM-270-RF230-*
CBM-270-PF230-*
Printing system
Line thermal dot printing
Printing width
48 mm (384 dots/line)
Dot density
8 dots/mm (Width, Length)
Paper feed pitch
0.125 mm
Printing speed
Approx. 11 lines/sec. (At maximum)
Printing columns and
character size
32 columns (12 ´ 24 Font A) 1.25 ´ 3.00 mm
42 columns (9 ´ 24 Font B) 0.88 ´ 3.00 mm
Line interval
Initial value: 4.23 mm (1/6 inch)
Can be set with a command (1/360 inch at minimum)
Character types
Alphanumerals, symbols, international characters
(Choose from 10 countries)
Character code
Domestic characters, IBM characters #2 (Choose either)
Bar code type
UPC-A/E, JAN(EAN) 13-/8-column, ITF, CODE 39, CODE 128, CODABAR
Paper
(See Paper Specifications)
Thermal paper roll : 58 + 0/- 1 mm xf83 (max.) mm, 60
~75mm thick
Thermal label paper : 58 + 0/- 1 mm xf83 (max.), 150mm thick (max.)
(L and M Spec. only) Label width: 56 mm (max.)
Label length: 25 mm/sh. (min.)
Interface
Serial (RS-232C), Parallel (CENTRONICS compliant)
Input buffer
2 KB
Download characters
Font A, B: 95 characters each
Auto-loading
Provided (Can be enabled/disabled with the DIP switch)
Paper end function
Provided
Paper near end function
Provided (Can be enabled/disabled with the DIP switch)
Label detecting function
Capable of selecting label interval detection, black mark detection, or none.
Printing color
Capable of printing in two colors (red/black) with the special thermal paper.
AC adapter
Rated input : 100
~240 V, 50/60 Hz, 40 VA
Rated output : 7.2 V DC, 2 A
Type
27 AD
AC cord
2-core cord (Depends on the destination)
Supply voltage
120 V AC +/- 10%, 60 Hz
230 V AC +/- 10%, 50/60 Hz
Power consumption
At non-printing: Approx. 2 W
At printing: Approx. 15 W (approx. 20 W at maximum)
Weight
Main body: Approx. 600 g (Paper roll excluded)
AC adapter: Approx. 350 g
Outer dimensions
106 (W) ´ 184 (D) ´ 110 (H) mm
Operating temperature
and humidity
5
~40
°C
, 35
~85 % RH (No dew condensation)
Storage temperature and
humidity
-20
~60
°C
, 10
~90% RH (No dew condensation)
Reliability
Printing head life: (25
°C
)
Pulse resistance : 50 million pulses or more (Print rate 12.5%)
Wear resistance : 50 km or more (With recommended thermal paper at
normal temperature and humidity)
EMI
*1 FCC Class-A
EN55022 Class-A
Applicable standard (Main
body)
*1
GS, CE Marking
Applicable standard
(Power source)
UL, C-UL
GS
* *1 indicates the standard satisfied when the AC adapter 27AD is used.
* GS and CE Marking are satisfied when the main body and AC adapter are combined.