CITIZEN CBM-270 - Manual (Page 82)

CBM-270 User’s Manual
CITIZEN 82
DC2 A n
[Function] Selecting a printing speed
[Code] <12>H<41>H<n>
[Range] 0 £ n £ 1
[Outline] This command specifies a printing command. n is valid only for the least
significant bit.
n0 Printing Speed
0 Standard print
1 High-speed print
[Caution] If a printing amount is too much for one line, a standard speed will be assumed.
Bar code printout and download bit image printout are automatically done at a
standard speed. At high-speed printout, printing quality may be deteriorated.
[Default] n = 1
DC3 n
[Function] Switching the Red/Black printing
[Code] <13>H<n>
[Range] 0 £ n £ 255
[Outline] This command selects/deselects black/red printout. n is valid only for the least
significant bit (n0).
n0 Black based paper n0 Red based paper
0 Deselects red printout 0 Deselects black printout
1 Selects red printout 1 Selects black printout
When deselected : Assumes a standard power-on pulse rate
When selected
: Increases a power-on pulse rate to change coloring.
[Caution] This command is valid only at the beginning of the line. It functions when special
purpose paper is used. Printing color becomes thicker on normal thermal paper.
[Default] n = 0
[Sample Program]
LPRINT "ABCDEFG" ;CHR$ (&HA) ;
LPRINT CHR$ (&H13) ; CHR& (1) ;
LPRINT "ABCDEFG" CHR& (&HA) ;
END
[Print Result]
When the normal thermal paper is used
Black print
Red print
When the special purpose paper is used
Standard print
High-temperature print