CITIZEN CBM-270 - Manual (Page 54)

CBM-270 User’s Manual
CITIZEN 54
ESC * m n1 n2 [ d ] k
[Function] Specifying the bit image mode
[Code] <1B> H <2A> H <m> <n1> <n2> [<d>] k
[Range] m= 0, 1, 32, 33
0 £ n1 £ 255
0 £ n2 £ 1
0 £ d £ 255
k = n1 + 256 ´ n2
(m = 0, 1)
k = (n1+ 256 ´ n2) ´ 3 (m = 32, 33)
[Outline] According to the number of dots specified in n1, n2, specify the bit image of mode n.
· The No. of dots printed is divided by 256, whose quotient is taken as n2 and
residualas n1.
· The total no. of dots printed in the bit image is equal to n1 + (256 ´ n2).
· When bit image data have been input in excess of dot position of one line (448
dots) , the excess data are discarded.
· d is bit image data, the bits subject to printing are taken as "1" and those not as
"0".
· The bit image modes specified by m are shown as follows:
Vertical Direction Horizontal Direction
m Mode
No. of Dots Dot Density Dot Density Max. No. of Dots
0 8-dot single density 8 67 DPI 101 DPI 192
1 8-dot double density 8 67 DPI 203 DPI 384
32 24-dots single density 24 203 DPI 101 DPI 192
33 24-dots double density 24 203 DPI 203 DPI 384
[Caution] ·When the values set in m (Bit image mode) are out of the above range, the data
following after n1 is processed as normal printing data.
· After completion of bit image printing, printer returns to normal data
processing mode.
[Example]