Camco Amplifier - Manual (Page 18)

3 INST
ALL
ATION
Z ≥ 4 Ω
Z ≥ 4 Ω
Z ≥ 4 Ω
Z ≥ 4 Ω
+
+
+
+
VORTEX 3 QUADRO
A
B
C
D
USER MANUAL
VORTEX 3 QUADRO P.6
Custom wiring should only be carried out by qualified personnel.
To prevent electric shock, do not operate the amplifier with any of the
conductor portion of the speaker wire exposed.
NOTE:
For reasons of safety and performance, use only high-quality fully insu-
lated speaker cables of stranded copper wire. Use the largest wire size that
is economically and physically practical, and make sure the cables are no
longer than necessary.
IMPORTANT:
When connecting speaker cabinets in parallel, always use all the contacts
in both SPEAKON connectors. If not, this may cause permanent damage to
the connectors and considerably reduce performance.
3.9.3 Four-Channel Operation
Four fully independent amplifier channels give the opportunity of use in several
applications, such as: multi-channel monitor systems, four channel reproduction,
compact amplification in active 2- or 4-way systems etc.