Baumer BA Scatec2 Gripper - Manual (Page 4)

20101215_Shortmanual_ScatecDCC_EN.doc 4/10 Baumer Electric AG
15.12.2010 / wej Frauenfeld, Switzerland
Position of Scatec or mounting angle of the Scatec is set that the laser spot hits the magazines 10 mm (a)
outside of the gripper. The angle of the Scatec to the vertical (gripper) has not to be greater than 20°.
(ill. 3)
For the best result, the nominal mounting height (h) of the Scatec is 70 mm.
(ill. 4)
h
Scatec
a
gripper
magazine
Scatec
< 20°