Baumer BA Scatec2 Gripper - Manual (Page 6)

20101215_Shortmanual_ScatecDCC_EN.doc 6/10 Baumer Electric AG
15.12.2010 / wej Frauenfeld, Switzerland
2.1 Version A
Situation:
Position of Scatec is fixed
The synchronization sensor can be moved along the conveyor
Testobjects:
put bright products in gripper
Adjustment:
Move the gripper slowly and stop it when the laser spot lies about 5 mm (b) behind the holding point.
Now move the synchronization sensor along the canveyor in transport direction until the sensor switch ON.
Scatec
Leading plate
magazines
gripper
Holding point
direction of
transport
b