Baumer GK473 - Manual (Page 28)

Manual_GK473_DeviceNet_EN.doc 28/31 Baumer IVO GmbH & Co. KG
04.05.11 Villingen-Schwenningen, Germany
8.4 Technical data
Electrical ratings
Supply voltage
12...24 VDC
Current consumption <200 mA
Display 4 LED´s as operating status indicators
LED operating states DP (green) fieldbus operating status
DP (red) operating and error status
RX / TX (yellow) receiving / transmitting a token (RS485)
Interfaces CANopen, DeviceNet, Profibus-DPV0
Interface to SPA EIA RS485 (ASCII -Protocol)
Data memory >10 years (flash / EEPROM)
Programmable parameters Auto-Check functions
Auto Scan SPA
Auto Message SPA Position
Auto Message SPA Error
Emitted interference DIN EN 61000-6-4
Interference immunity DIN EN 61000-6-2
Mechanical design
Operating temperature
-10...+50 °C
Storing temperature -20...+70 °C
Relative humidity 80 % non-condensing
Protection DIN EN 60529 IP 20
E-connection D-SUB-female connector, 9-pins
Plug-in screw terminals
Housing type DIN rail housing EN 50022
Dimensions W x H x L 22.6 x 99 x 114.5 mm
Mounting DIN rail housing EN 50022
Weight approx. 120 g
Material Polyamide green, UL 94V-0