Baumer GE-GB-GXxxx - Manual (Page 34)

Manual_ProfibusDPV2_BIDE_EN.docx 34/41 Baumer IVO GmbH & Co. KG
22.11.12 Villingen-Schwenningen, Germany
7.3. Encoder operating parameters
Description of operating parameters
Parameter Significance
Sense of rotation Behaviour of the output code relating to the shaft’s sense of rotation when looking at
the flange.
CW („clockwise“) = ascending values with clockwise rotation
CCW
(„counter-clockwise“) = ascending values with counter-clockwise rotation
Resolution
(„Measuring units
per revolution“) Number of steps per revolution, input in integral steps
Measuring range
(„Total Measuring
Range“) Total resolution = number of steps per revolution x number of revolutions,
input in integral steps
Steps The actual encoder position is assigned to a certain position value (referencing)
Operating parameter values
Parameter Value range Default setting Data type
Sense of rotation CW/CCW CW Byte
Resolution 1 to 4096 – magtivo
1 to 8192 – multivo
1 to 262144 – multivoPlus
4096
8192
262144 Unsigned 32
Measuring range 1 to 67108864 (2
26
) – magtivo
1 to 536870912 (2
29
) – multivo
1 to 2147483648 (2
31
) – multivoPlus
67108864
536870912
2147483648 Unsigned 32
Peset value 0 to (measuring range - 1 step) 0 Unsigned 32