FRIGIDAIRE FRS123LS1 - Manual (Page 18)

1. The inside and outside connecting
cable can be connected without
removing the front grille.
2. Connecting cable between indoor
unit and outdoor unit shall be
approved polychloroprene
sheathed flexible cord, type
cord.
3. Lift the indoor unit panel up,
remove the electrical box cover by
loosening the screw.
4. Ensure the colour of wires of
outdoor unit and the terminal Nos.
are the same to the indoors
respectively.
5. Wrap those cables not connected
with terminals with insulation
tapes, so that they will not touch
any electrical components. Secure
the cable onto the control board
with the cord clamp.
Connect the cable to the indoor unit
Electrical work
(Heating and cooling model)
(Heating and cooling model)
"Cable A"
"Cable C”
"Cable B"
or
cover
Electrical box
designation 16AWG or heavier
Code wire
1.57" 0.39"
> 12000 btu's CABLE
< 12000 btu's CABLE (Cooling model)
< 12000 btu's CABLE
1.57"
1.57"
1.57"
0.39" 0.39"
0.39"
Code wire Code wire
Code wire
20