Preparing the device for operation, Attention – FRIGIDAIRE FRS123LS1 User Manual

Page 27

Advertising
background image

1. Contact a specialist to install the device.
2. Guarantee that the unit is appropriately fastened and complies with all of
the aforementioned safety norms.
3. Before operating the air conditioner, ensure that the air filter is installed
correctly.
4. If the unit has been out of use for a long period of time, it is recommended
that the air filter be cleaned before use. During continuous use, clean the air
filter every two weeks.
5. This air conditioner was designed for use under the following conditions:

If air conditioner is used outside of the above conditions, certain safety protection

features may come into operation and cause the unit to function abnormally.

Optimum performance will be achieved within these operating temperature.

Preparing the device for operation

Preparing the device for operation

Cool

MODE

Indoor

Indoor

Outdoor

Indoor

Outdoor

Attention

Dehumidifier

Temperature

Temperature

Temperature

Heat*

*

excess of this figure, the surface of the air conditioner may attract condensation.

Room relative humidity should be less than 80%. If the air conditioner operates in

Please set the horizontal louver to its maximum angle (vertically to the floor), and

set HIGH fan mode.

63°F~90°F

64°F~109°F 63°F~86°F

63°F~90°F

52°F~109°F

19°F~75°F

only for models with heating function

29

Outdoor

Advertising
This manual is related to the following products: