Installing an integrated storage controller card – Dell PowerEdge T610 User Manual
Page 114
Advertising
114
Installing System Components
Figure 3-17.
Removing and Installing an Integrated Storage Controller Card
Installing an Integrated Storage Controller Card
NOTE:
Be sure to connect the cables according to the connector labels on the
cables. The cables are not operational if reversed.
1 If applicable, install the RAID battery (see "Installing a RAID Battery") and
connect the RAID battery cable to the connector on the card. See
Figure 3-17.
1
data cables
2
RAID battery cable connector (PERC
card only)
3
integrated storage controller card
4
card guides (2)
1
2
3
4
book.book Page 114 Tuesday, September 15, 2009 10:08 AM
Advertising