Installing a processor – Dell PowerEdge T610 User Manual
Page 134
134
Installing System Components
If you are permanently removing a second processor, you must install a
processor blank and a heat-sink blank in the CPU2 socket to ensure proper
system cooling. Installing blanks is similar to installing a processor. See
"Installing a Processor."
Figure 3-22.
Installing and Removing a Processor
Installing a Processor
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
socket-release lever
2
processor shield
3
socket key (2)
4
notch in processor (2)
5
ZIF socket
6
processor
6
5
1
2
4
3
book.book Page 134 Tuesday, September 15, 2009 10:08 AM