Rack front plate, Rack front plate -7 – Compaq PROLIANT ML370 User Manual
Page 23
Advertising
Removal and Replacement Procedures 2-7
Rack Front Plate
NOTE: This procedure applies to the ProLiant ML370 rack-mountable model only.
To remove the rack front plate:
1. Remove the ten T-15 screws from the rack front plate
.
2. Pull the rack front plate away from the server
.
1
2
Figure 2-2. Removing the rack front plate
Reverse steps 1 and 2 to replace the rack front plate.
Advertising