Clarion DXZ946MP - Manual (Page 10)

10
DXZ946MP
English 6. REMOTE CONTROL
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
2. Insert the AA (SUM-3, R-6/1.5V) batteries
that came with the remote control unit facing
in the directions shown in the figure, then
close the rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
[FUNC]
[ ],[ ]
[ISR]
[MUTE]
[SCN]
[RPT]
[ ],[ ]
[BAND]
[DISP]
[RDM]
[2-ZONE]
Remote control unit
Inserting the Batteries
Receiver for remote control unit
Operationg range : 30° in all directions
Signal transmitter
AA (SUM-3, R-6/1.5V)
Batteries
Rear cover
Rear side