Clarion DXZ946MP - Manual (Page 15)

DXZ946MP
15
English
Basic Operations
■ To stop scrolling
Touch on the title display.
Setting the ADF
• ADF is the abbreviation of Anti Distortion
Filter.
The adopted “Liveliness Enhancement Filter”
and “Sound Tone Compensation” functions
allow well-modulated realistic playback without
affecting the characteristics of the original sound
tone.
This unit are provided with 4 types of sound
tone effects stored in memory. Select the one
you prefer.
ADF-1 : Suitable for genuine speakers
ADF-2 : Suitable for separate speakers
ADF-3 : Suitable for co-axial speakers
USER : This setting can be adjusted by the
user to his or her individual preference.
OFF : No sound effect
• The factory default setting for “OFF”.
Notes:
• As the volume changes when ADF is switched,
switch ADF with the volume and “SW VOLUME”
(sub-woofer) and “CTR VOLUME” (center
speaker) turned down as far as possible.
• On some speaker systems, sufficient effect
sometimes cannot be obtained. If this happens,
adjust the ADF parameter or the volume.
• When ADF is set to “USER”, “1”, “2” or “3”, the
VSE function and BASS/TREB function under
EQ-SELECT are disabled.
1. Press the [SOUND] button.
2. Touch ADF.
RTN
2 - ZONE
POSITION
OFF
OFF
ADF
P. EQ
OFF
OFF
A - MODE
Dolby PL II
OFF
SOUND MENU
3. Touch on the right of the display to
select the ADF mode.
RTN
OFF ADF MODE
When ADF is set to “OFF”, the ADF setting
is not reflected on the music source. This
ends the ADF setting. Press the [SOUND]
button to return to the original mode.
∗
Select one of USER, 1, 2, 3, or OFF.
4. To change the details of the ADF setting,
press the [A] button.
5. Touch on the adjustment item display
to select the desired item.
Each touch of
switches the
adjustment item display as follows:
●Adjustment item (when USER is
selected in step 3)
BASS
➜ TREBLE ➜ COMP ➜ BASS...
●Adjustment item (when 1 to 3 is
selected in step 3)
LEVEL
➜ COMP ➜ LEVEL...
6. Touch on the right of the display to
adjust the item.
∗
“BASS” and “TREBLE” can be adjusted
within the range 1 to 13.
∗
“LEVEL” can be adjusted within the range
-3 to +3.
∗
Select either “ON” or “OFF” for “COMP”.
7. Press the [SOUND] button to return to the
original mode.
Adjusting the Sub-woofer and
Center Speaker
• “SW VOLUME” (sub-woofer) can be adjusted
only when “SUB-WOOFER” is set to “ON”.
• “CTR VOLUME” (center speaker) can be
adjusted only when the Dolby Pro Logic II
mode is set to either “MUSIC” or “MATRIX”,
“SP-SETTING” is set to “CTR+SW” and
“CENTER-SP” is set to “ON”.
• The factory default setting for SW VOLUME is
“0” and for CTR VOLUME is “0”.
1. Press the [SOUND] button.
2. Touch A-MODE.
RTN
2 - ZONE
POSITION
OFF
OFF
ADF
P. EQ
OFF
OFF
A - MODE
Dolby PL II
OFF
SOUND MENU
3. Touch on the adjustment item display
to select “SW VOLUME” or “CTR VOLUME”.
RTN
SW VOLUME
AUDIO MODE
0