Clarion DXZ946MP - Manual (Page 40)

40
DXZ946MP
English
2. Touch on the setting item display to
select “AC-PROIII” under “SOUND” and “EQ
SELECT” under “SOUND”.
ADJUST MODE
AC - PRO III PRO
SOUND
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
the mode.
Mode selection
4. Press the [A] button to return to the original
mode.
Setting the speaker
configuration (SP-SETTING)
Set to match the speaker configuration of your
car to fully bring out the audio characteristics of
this unit.
• The factory default setting is “SW L + SW R ”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “SP-SETTING” under “SOUND”.
ADJUST MODE
SP - SETTING
SOUND
SW L + SW R
3. Either touch on the right of the
display, or turn the [ROTARY] knob to set
the speaker configuration.
Operations Common to Each Mode
CTR+SW Front/rear speakers (4ch)
5.1ch Center speaker (1ch)
configuration Sub-woofer (1ch)
SW L +SW R Front/rear speakers (4ch)
4ch+sub-woofer Sub-woofer (2ch)
configuration
Speaker configuration
Notes:
• Sound is not output from the center speaker
unless the following settings are made when
“CTR+SW” is set.
(1) Referring to “Selecting the PLII menu” (cf.
page 17), set the Dolby Pro Logic II mode to
“MUSIC” or “MATRIX”.
(2) Referring to “Setting speakers ON/OFF” (cf.
page 40), set the center speaker to “ON”.
• Sound is not output from the sub-woofer Lch
when “SW L +SW R ” is set and the Dolby Pro
Logic II mode is set to “MUSIC” or “MATRIX”.
4. Press the [A] button to return to the original
mode.
Setting speakers ON/OFF
(CENTER-SP/SUB-WOOFER)
Set the center speaker (CENTER-SP) and sub-
woofer (SUB-WOOFER) ON/OFF.
Be sure to set this setting to “OFF” when there
is no center speaker or sub-woofer.
• The center speaker (CENTER-SP) can be set
when the Dolby Pro Logic II mode is set to
“MUSIC” or “MATRIX”, and “SP-SETTING” is
set to “CTR-SW”.
• The factory default setting is “ON”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “CENTER-SP” under “SOUND” and
“SUB-WOOFER” under “SOUND”.
ADJUST MODE
CENTER - SP
SOUND
ON
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
“ON” or “OFF”.
4. Press the [A] button to return to the original
mode.
AC-PRO III STD
• Standard mode (VSE menu)
PRO
• PRO mode (position menu)
EQ SELECT P.EQ
• Equalizer mode (P.EQ menu)
BAS/TREB
• Bass/treble mode