Clarion DXZ946MP - Manual (Page 31)

DXZ946MP
31
English
Different Pieces of Music Heard by Plural Listeners
(2-ZONE function)
The 2-ZONE function outputs separate sounds
from the MAIN zone and SUB zone by
simultaneously operating 2 sources in the 1
center unit, thereby allowing 2 or more listeners
to enjoy separate music sources.
This unit can control its internal sources (radio,
CD, MP3, etc.) to play them back, and further,
can simultaneously play back sources from
external equipment connected via CeNET (for
instance, CD changers etc.).
The sources of the MAIN zone are played back
from the speakers inside your car, and those of
the SUB zone are from the headphone systems
(WH104/WH204).
RTN OFF
RTN
Internal External
ON
CONTROL
RTN
External Internal
ON
CONTROL
The upper figure is for when a sound source is
being played by the unit’s internal mode (radio,
CD, AUX) on the speakers.
The lower figure is for when a sound source is
being played by the unit’s external mode (CD
changer, DVD changer, TV, AUX) on the
speakers.
• The factory default setting is “OFF”.
Notes:
• The ISR function is not available while the 2-
ZONE function is in use.
• The new volume adjustment made by turning the
[ROTARY] knob on this unit is reflected only on
the speakers.
The AUX-SENS setting is reflected on both the
speakers and the headphones.
■ Screen display when the 2-ZONE
function is in use
“INT.” (internal mode) or “EXT.” (external mode)
is displayed in the center of the display to
indicate whether you can hear play in the
internal mode or external mode in the current 2-
ZONE function operation mode.
1. Press the [SOUND] button.
2. Touch 2-ZONE.
RTN
2 - ZONE
POSITION
OFF
OFF
ADF
P. EQ
OFF
OFF
A - MODE
Dolby PL II
OFF
SOUND MENU
3. Touch and hold the ON/OFF center of the
display for 1 second or longer.
RTN
Internal External
ON
CONTROL
When 2-ZONE is set to ON, the current 2-
ZONE type is displayed.
The 2-ZONE function is not available when
2-ZONE is set to OFF. Press the [SOUND]
button to return to the original mode.
4. Touch on the ON/OFF display to
select the 2-ZONE type.
2-ZONE type
5. Touch the speaker display or the headphone
display to select the 2-ZONE function
operation mode.
If you touch the speaker display, you can
operate audio on the speakers.
If you touch the headphone display, you can
operate audio on the headphones.
6. Press the [SOUND] button to return to the
original mode.
■ To switch the 2-ZONE function ON/
OFF
1. Press and hold the [SOUND] button on the
unit for 1 second or longer.
Speaker Headphones
Type 1
Internal External
(internal mode) (external mode)
Type 2
External Internal
(external mode) (internal mode)
Type-1
Type-2
MAIN SUB