Classe Audio Surround Sound Processor SSP-800 User Manual
Page 21
21
21 Main Power On/Off Switch
Th
is switch connects and disconnects the SSP-800 from AC.
NOTE: Changes to settings are stored whenever the SSP-800 is put into
Standby
. Turning off power to the unit before fi rst entering Standby mode
erases any setting changes that have been made since the unit was last placed in
Standby mode.
22 AC Power Cord Input
Th
e detachable three-conductor AC power cord and the socket into
which it connects conform to rigorous standards developed by the IEC
(International Electrotechnical Commission).
Danger!
Your SSP-800 contains potentially dangerous voltages and
current capabilities. Do not attempt to open it! There are no
user-serviceable parts inside. All service must be referred to a
qualified authorized Classé dealer or distributor.