Classe Audio Surround Sound Processor SSP-800 - Manual (Page 40)

40
input setup Each of the 20 inputs supported by your SSP-800 Surround Sound Processor
can be customized in several ways to enhance system performance or to simplify
controls. Th
e Input Setup menu always opens to the setup page for Input 1. Th e
menu contains six buttons that completely defi ne each input – Name, Audio,
Confi guration, In use, Video, and Next input, as shown below. Th
e same
menu is used to set up each input:
name
Th e Name button provides a way to customize the names of the inputs as
displayed on the input selection screens. For example, if you have the Classé
DVD transport connected to Input 6, you may want to rename the input
to “CDT-300” to make it easier to remember. Each name can be up to 14
characters long.
To change an input name to something more specifi c to your system, use the
four buttons along the bottom of the Input Name menu, shown in the Input
Setup diagram above. Th
e buttons provide the following functions:
• Th e left arrow button acts like the backspace key on a computer keyboard.
Touch this button to delete characters by moving the cursor to the left.
• Th e right arrow button adds characters by moving the cursor to the right.
• Th e + and – buttons allow you to change the current character by scrolling
through the available list of characters. Th is list includes all upper- and
lower-case letters of the alphabet, the numbers 0 to 9, and a variety of
punctuation.
When you’ve completed modifying the input name, touch the Back button to
return to the Input Setup menu.