Classe Audio Surround Sound Processor SSP-800 - Manual (Page 38)

38
max volume Th e Max Volume page allows you to establish a maximum volume setting
for your system. Th is scale runs from 0 to 100, with 100 indicating that you
do not want any artifi cial limit placed on the maximum gain your Surround
Sound Processor can provide. Th
is setting is interactive. You can set the value
to something less than 100, and then adjust the volume to see whether it is
appropriate.
NOTE: Th e volume knob itself does not set the maximum volume; you
must set the maximum volume level in this Max Volume setup menu.
startup volume Touching the Startup Volume option allows you to set up a preferred volume
level for when the SSP-800 wakes out of standby. Th
is starting volume level can
be confi gured in two ways:
• the Last Volume option sets the starting volume to the last level selected
before the unit was powered down. Th e mute setting is also remembered.
• the Specifi c option allows you to set a specifi c volume level with the mute
control on or off .
IR setup Touching the IR option displays the IR volume speed setup page, shown below.
Similar to the rotary knob setup, the IR volume speed controls the degree at
which the volume is stepped through when the remote control volume button
is pressed. Th
ree settings are available – Fast, Normal, and Slow. Th e default
setting is Normal.