Enclosure interior – Chicago Pneumatic CS7000 User Manual
Page 22
6159939130 CS7000 Controller Hardware Overview Manual
Page 2-6
39-30-41365
I/O Connector
The 19-position remote I/O connector provides the interface between external control/monitoring
devices and the internal control electronics. CP techmotive accessories, such as socketrays, are
connected here.
The mating connector for this port is a 14-shell, 19-pin, strain relief (SR) connector
(part number 23-10-5200). The mating connector enables connection of your own remote control
and/or monitoring devices, such as external annunciator lamps or remote cycle-on contacts. Refer to
I/O Wiring in Chapter 3. Installing the CS7000 Controller for pinout details.
Enclosure Interior
The enclosure interior for the CS7000 Controller includes the following components and sub-
components:
•
Sub-panel, that includes:
•
Disconnect switch
•
Power supply (24 VDC)
•
Circuit breaker/ Fuses
•
Ground fault circuit interrupter (GFCI)
•
Backplane, that includes:
•
Address switch
•
DCM fuse (internal DCM power)
•
I/O power (24 VDC) fuses
•
TCM, that includes:
•
DCM control card
•
Servo
•
Communications Control Module (CCM) optionally
See Figure 2-5 on page 2-7 and Figure 2-6 on page 2-8.