Chicago Pneumatic CS7000 - Manual (Page 41)

Chapter 4. Technical Information
December 2005 4-1
4. Technical Information
Maintenance of the CS7000 Controller consists of replacing fuses and cleaning the enclosure window.
Replacement Parts
If, at any time, you need to replace or order new parts for your CS7000 Controller.
Table 4-1. Replacement Parts
Qty. Description Part Number
1 50A TCM GEN2 49-4102-015000
1 +24V DC Power Supply 12-20-5007
1 Fuse 1A SB, Littelfuse 39001 5x20 mm 13-10-61001
2 Fuse 20A, MDA-20 13-10-0555
NOTE:
????
All part numbers used in Table 4-1 are CP techmotive part
numbers unless otherwise specified.
Cleaning the Enclosure Window
Use only water-based cleaners to clean the plastic window. Other solvents may damage the window.
Assembly Drawings
Assembly and wiring diagrams are available for the CS7000 Controller. To request an assembly or
wiring diagram, contact the CP techmotive Technical Service Department. To contact CP techmotive,
refer to Contact Information next.