Chicago Pneumatic CS7000 - Manual (Page 5)

Preface
December 2005 i
Preface
The CS7000 Controller manufactured by CP techmotive is a component of one of the most powerful
DC electric nutrunner fastening control systems available. The system uses 100% digital technology
to ensure accurate and reliable fastening and data acquisition. Microprocessors in both the fastening
tool and the controller s tool control module (TCM) enable the system to perform to levels of
accuracy while providing easy set-up and operation previously unattainable.
With Intelligent tool technology you no longer need to enter tool identification, calibration, angle
counts, speed and other information. You simply plug in the tool, power on the system, program the
desired tightening specifications and begin production.
A complete nutrunner fastening control system is made up of the CS7000 Controller, a cable and a
CP techmotive 177 or 277 Series nutrunner. The powerful CP techmotive Visual Supervisor software
program is used for system setup, fastening, data collection, and diagnostics.
Who Should Use This Manual
This manual is written for the engineers, technicians and users who will set-up and/or operate the
CS7000 Controller with any of the Intelligent (177 and 277 Series) nutrunners.
How to Use This Manual
This manual provides installation, maintenance and technical information about the CS7000
Controllers.
This Preface provides conventions and abbreviations used throughout this manual.
If you have never used a CS7000 Controller, read this manual entirely. The first two chapters will
help you become familiar with safety requirements, the location of components, software and
features.
If you are already familiar with the CS7000 Controller, look over Chapter 3. Installing the CS7000
Controller and Chapter 4. Technical Information, which describe the power requirements, details of
the I/O wiring and connectors, replacement parts and fuses.