Canon FB1200S User Manual
Page 22
22
WARNING
• The SCSI ID does not have to follow the order of connection. As long as an ID is not
repeated, IDs between 0 and 6 can be used.
• SCSI device equipped computers usually have the following SCSI ID already assigned.
Refer to the manuals of the appropriate devices. Assign an unused SCSI ID to this scanner.
- For Windows
7: SCSI card or internal SCSI controller
- For Macintosh
0: Internal hard disk drive
3: Internal CD-ROM drive (Desktop model with an internal CD-ROM drive)
7: Macintosh CPU
• Ensure that you unplug the AC adapter from the scanner before you change the SCSI ID or
terminator settings. After resetting them, reconnect the AC adapter and restart the computer.
• How to Set the SCSI ID and Terminator
To set the SCSI ID and terminator on this scanner, adjust the dip switches found on the back
panel of the scanner.
Dip Switches
OPTIO
N
DC15V
ID
124TE
RM
ON
SCSI
SCSI
*FB1200S_PG19-32
4/23/99, 2:56 PM
22