Canon FB1200S - Manual (Page 45)

45
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2. Push the left edge of the document stack flush against the paper guide
and as far under the ADF cover as possible.
• If the document is a standard size, align its top corner with the corresponding paper
alignment mark on the document tray.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3. Slide the movable paper guide lightly against the side of the stack.
• Shift the movable paper guide snugly up against the stack, but not so tightly that it
crimps the stack.
NOTE
• Once a document has been set into the ADF, the
document will be scanned according to the scanner
software settings. The settings will vary among
different software programs.
• Continuous scanning can only be accomplished
with application software supporting that
function.
Paper Alignment Mark
Movable Paper Guide
*FB1200S_PG33-62.v.1P 4/19/99, 7:34 PM 45