Problems with the scanner – Canon FB1200S User Manual
Page 65
65
Problems starting Plug-in Module CS-S as a plug-in from within another program
Cause 1:
Insufficient memory to start Plug-in Module CS-S
Solution:
Close programs other than the host program and start Plug-in Module CS-S
Cause 2:
Plug-in Module CS-S is not installed
Solution:
Install Plug-in Module CS-S (See Quick Start Guide)
Cause 3:
Plug-in Module CS-S is not installed in the program’s plug-in folder
Solution:
Plug-in Module CS-S is a plug-in. If the other program does not have Plug-in
Module CS-S installed, it will not work. Install Plug-in Module CS-S (See Quick
Start Guide)
Problems with the Scanner
Scanner not identified (Part 1: Windows)
• Please also read Scanner Not Identified
Cause 1:
SCSI card not properly installed
Solution:
Install SCSI card properly (Make sure the SCSI card is securely seated into the
slot)
Cause 2:
SCSI driver not installed
Solution:
Install SCSI driver (See Quick Start Guide)
*FB1200S_PG60-83.v.1.P
4/20/99, 5:45 PM
65