Canon FB1200S User Manual
Page 26
26
SCSI Connector and SCSI Interface Cable Descriptions
This scanner is equipped with both a Half Pitch 50-Pin and D-Sub 25-Pin connector (port).
The supplied SCSI interface cable has a Half Pitch 50-Pin connector on one end and a D-Sub
25-Pin connector on the other.
There are many other types of SCSI connector on the market. When choosing a SCSI cable,
you must match the connector shapes, the SCSI cable standard and the impedance category.
Without all three correctly matched at both the computer and SCSI device ends, the
connection will not work. Check your computer’s SCSI connector to make sure it fits the
supplied SCSI interface cable. If it doesn’t, purchase a SCSI interface cable (high-impedance)
with connectors that fit into the connectors on your computer and scanner.
OPTIO
N
DC15V
ID
124TE
RM
ON
SCSI
SCSI
SCSI Connector
D-Sub 25-Pin (Female)
SCSI Connector
Half Pitch 50-Pin (Female)
SCSI Interface Cable
Half Pitch 50-Pin
Connector (Male)
D-Sub 25 Pin
Connector (Male)
*FB1200S_PG19-32
4/19/99, 7:33 PM
26