Canon FB1200S - Manual (Page 66)

66
Cause 3: SCSI card not operating correctly
Solution: Follow the procedures below to confirm the operation of the SCSI card.
• Windows 95/98
1. Click the [Start] button on the taskbar and select [Settings] and
[Control Panel].
2. Double-click the [System] icon.
3. Click the [Device Manager] tab.
4. Click the [+] icon that appears to the left of the [SCSI Controller]
option.
The SCSI card is not operating correctly if an exclamation mark (!) or (x)
appears on the SCSI driver name in the SCSI Controller option. Reinstall the
SCSI driver following the instructions in the Quick Start Guide.
• Windows NT 4.0
1. Click the [Start] button on the taskbar and select [Control Panel].
2. Double-click the [SCSI Adapters] icon.
3. Click the [Devices] tab.
The SCSI card is not operating correctly if a SCSI driver name does not appear
in the [SCSI Adapter] option. Reinstall the SCSI driver following the
instructions in the Quick Start Guide.
Cause 4: IRQ or I/O port address conflict with another card (sound or network card)
Solution: Change the IRQ or I/O settings
Check the manuals included with the other cards for appropriate settings
*FB1200S_PG60-83.v.1.P 4/20/99, 4:58 PM 66