Compaq 3500 - Manual (Page 108)

13-10 Security Features
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 2:20 PM
Part Number: 310296-002 File name: Ch13.doc
Enabling the Quick Controls
There are two ways to enable Quick Controls, either from
Passwords Properties or from Computer Setup.
To enable the Quick Controls from Passwords Properties in
Windows 95 or later or Windows NT:
1. Click the Computer Security tab in Passwords Properties.
2. If a power-on password has been set, the QuickLock and
QuickLock on Standby options become available. When you
select QuickLock, the QuickBlank option also becomes
available. Check each box with the features you want enabled.
To enable the Quick Controls from Computer Setup:
1. Access the Computer Setup utility.
2. Click Systems Changes icon
Æ Security Management Æ
Password Options tab.
3. If a power-on password has been set, the
QuickLock/QuickBlank on Standby option also becomes
available. Check each box with the features you want enabled.
Initiating the Quick Controls
You can initiate QuickLock and QuickBlank at any time while the
computer is on. Before initiating these security features, the
following conditions must be met:
■ A power-on password must be established.
■ QuickLock and QuickBlank must be enabled.
Once these requirements are met, you can initiate QuickLock and
QuickBlank in one of two ways:
■ Using the
Fn+F6 hotkeys, which work only on the computer
keyboard.
■ Using the key combination
Ctrl+Alt+L, which works on both
the computer and external keyboards.
To exit QuickLock and QuickBlank once they have been initiated,
enter your power-on password.
NOTE: QuickLock on Suspend cannot be initiated from the
keyboard.