Compaq 3500 - Manual (Page 129)

Computer Setup and Diagnostics Utilities 15-5
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:30 PM
Part Number: 310296-002 File name: Ch15.doc
Running Computer Checkup (TEST)
Computer Checkup (TEST) determines whether the various
computer components and devices are recognized by the computer
and are functioning properly. You can display, print, or save the
information generated by Computer Checkup.
1. Plug the computer into an external power source. (A low
battery condition could interrupt the program.)
2. Connect a printer if you want to print a log of error messages.
3. Turn on the external devices that you want to test.
4. Turn on or restart the computer.
5. When a blinking cursor appears in the top right corner of the
screen, press
F10.
6. If prompted, select a language. The Configuration and
Diagnostics menu is displayed.
7. Select Computer Checkup. The Test Option menu is
displayed.
8. Select View the Device List from the Test Option menu.
■ If the list of installed devices is correct, select OK. The Test
Option menu is displayed again.
■ If the list is incorrect, ensure that any new devices are
installed properly. If you do not find an installation problem
with a Compaq device not on the list, call your Compaq
authorized dealer, reseller, or service provider. Non-
Compaq devices may not be detected.
9. Select one of the following from the Test Option menu:
■ Quick Check Diagnostics
■ Automatic Diagnostics
■ Prompted Diagnostics
10. Follow the instructions on the screen as the devices are tested.
When testing is complete, the Test Option menu appears.
11. Exit the menus to return to your original screen.