Dell PowerEdge T300 - Manual (Page 126)

126
Installing System Components
b While pulling the release pin, slide the backplane towards the top of
the system.
c Pull the backplane board until the securing slots are free from the
securing tabs, and lift the board from the chassis.
Figure 3-32. Removing and Installing the SAS Backplane
1 backplane release pin 2 securing tabs (4)
3 securing slots (4) 4 SAS connector
5 backplane connector 6 SAS backplane
7 SAS cable connector 8 power cable
1
8
4
7
5
3
2
6
book.book Page 126 Sunday, June 21, 2009 10:04 AM