Dell PowerEdge T300 - Manual (Page 80)

80
Installing System Components
Figure 3-12. Removing and Installing a Hard Drive Carrier
5 With the handle on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane (see Figure 3-11).
6 Push in (towards the system) on the hard drive carrier handle and rotate
the handle up until it snaps into place (see Figure 3-11).
7 Replace the front bezel (see "Installing the Front Bezel" on page 64).
Removing a Cabled Hard Drive
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and from the peripherals.
1 screws (4) 2 hard drive carrier
3 hard drive 4 SAS mounting hole
1 2
3
4
book.book Page 80 Sunday, June 21, 2009 10:04 AM