Installing the raid battery – Dell PowerEdge R815 User Manual
Page 119
Installing System Components
119
Figure 3-20. Removing and Installing the RAID Battery
Installing the RAID Battery
1 Insert the RAID battery into the battery carrier in the cooling shroud.
See Figure 3-20.
2 Route the RAID battery cable along the chassis wall and through the slot
in the battery carrier.
3 Tuck any cable slack into the area in front of the battery carrier slot.
4 Connect the battery cable to the connector on the integrated storage
controller card.
5 Replace the cooling fan assembly. See "Installing the Cooling Fan
6 Close the system. See "Closing the System" on page 77.
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
RAID battery carrier
2
RAID battery
3
RAID battery cable
4
RAID battery carrier slot
5
cooling shroud
4
2
3
5
1
book.book Page 119 Wednesday, December 18, 2013 2:48 PM