Installing an idrac6 enterprise card, E figure 3-21 – Dell PowerEdge R815 User Manual
Page 121
Installing System Components
121
Figure 3-21. Installing and Removing an iDRAC6 Enterprise Card (Optional)
Installing an iDRAC6 Enterprise Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 76.
1
iDRAC6 enterprise card
2
VFlash media slot
3
VFlash SD card
4
retention standoff posts (2)
5
retention standoff tabs (2)
6
iDRAC6 enterprise card connector
1
2
3
4
5
6
book.book Page 121 Wednesday, December 18, 2013 2:48 PM