Compaq 102 - Manual (Page 71)

Display assembly
NOTE: Each display assembly spare part kit includes 1 webcam, 1 microphone, 2 speakers, and 2
WLAN antenna assemblies; 2 WWAN antenna assemblies on select models.
Description Spare part number
Display assembly, 25.7-cm (10.1-in), WSVGA, AntiGlare for use with WWAN 594806-001
Display panel, 25.7-cm (10.1-in), WSVGA, non-PMMA, AntiGlare, LED 600125-001
Hinge covers 537617-001
Display bezel with logo for use with webcam and microphone 537644-001
Display hinge kit
Includes left and right display panel hinges
537658-001
Speaker assembly
Includes 2 speakers, cable, and housing
594811-001
Webcam module 537660-001
Display cable kit
Includes display/webcam cable and WLAN antennas
579571-001
Microphone assembly (44 dB, 4.9 × 2.2, omnidirectional) 581323-001
WWAN antenna assemblies with cables 538022-001
Display back cover with logo 594808-001
Display screw kit (not illustrated) 538510-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 36 ).
5. If your computer has WWAN capability, remove the SIM (see SIM on page 37 ).
6. Remove the following components:
a. Keyboard (see Keyboard on page 40 )
b. Hard drive (see Mass storage devices on page 44 )
c. Top cover (see Top cover on page 46 )
Component replacement procedures 63