Computer setup, Computer setup in windows 7, Starting the setup utility – Compaq 102 User Manual
Page 78: Using the setup utility, Changing the language of the setup utility, 5 computer setup, Starting the setup utility using the setup utility
5 Computer Setup
Computer Setup in Windows 7
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working.
The utility reports information about the device and provides settings for startup, security, and other
preferences.
To start the Setup Utility:
▲
Open the Setup Utility by turning on or restarting the device, and then pressing
f10
while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
Open the Setup Utility by turning on or restarting the device, and then pressing
f10
while the “F10
= BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select System Configuration > Language, and then press
enter
.
3.
Use the arrow keys to select a language, and then press
enter
.
4.
When a confirmation prompt with your language selected is displayed, press
enter
.
5.
To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press
enter
.
Your change goes into effect immediately.
70 Chapter 5 Computer Setup