Displaying system information, Restoring default settings in the setup utility, Exiting the setup utility – Compaq 102 User Manual
Page 83: Setup utility menus
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
f10
while the
“F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3.
To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press
enter
.
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
f10
while the
“F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press
enter
.
3.
When the Setup Confirmation is displayed, press
enter
.
4.
To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press
enter
.
The Setup Utility default settings go into effect when the computer restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the factory
default settings.
Exiting the Setup Utility
You can exit the Setup Utility with or without saving changes.
●
To exit the Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press
esc
to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press
enter
.
●
To exit the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press
esc
to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press
enter
.
After either choice, the computer restarts and loads the operating system.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE:
Some of the Setup Utility menu items listed in this chapter may not be supported by your
computer.
Computer Setup in Windows XP 75