Dell Metered PDU LCD - Manual (Page 35)

35 LCD Operation |
Table 7 provides descriptions of Main Menu selections.
Table 7. Main Menu Selections
Main Menu Description
Performance Selections on the Performance Menu display data that represent the real-time operating status
of the system.
S The L1, L2, or L3 submenus provide voltage, frequency, or current data for each phase.
S The Power submenu provides present readings for power (VA) and wattage (W) data.
S The Environment menu displays present temperature and humidity readings (if sensors are
installed and connected).
Alarms Alarm screens are only visible when alarms are active. Selecting the Alarm menu displays the
message “No active alarm” if no alarms are active.
Event Log Scroll through the Event Log to review the most recent events (50 events maximum).
NOTE: Events do not automatically display when they occur the way alarms display. Events are
shown only in the event log.
System Info The System Info menu provides rPDU identification information, such as model serial
number and firmware version identification.
Settings The Settings menu provides configuration options for customizing performance monitoring
thresholds and configuring the user interface.
NOTE: For Delta models, L1 represents L1-L3 data, L2 represents L1-L2 data, and L3 represents L2-L3 data.
Selecting a Menu
To select a menu:
1 From the Main menu, use the or button to navigate to any menu.
2 Press and release the button to select the menu.
3 To exit any menu screen and return to the previous menu level, press the button for longer than one
second.
Performance Menu
Selections on the Performance menu display data that represents the real-time operating status of the system.
The Performance menu contains the following submenus:
S
The L1, L2, or L3 menus provide voltage, current, and frequency data for each phase.
S
The Power menu provides present readings for power (VA) and wattage (W) data.
S
The Environment menu displays the present temperature (°C) and humidity (%) readings (if sensors are
installed and connected).
NOTE: For Delta models, L1 represents L1-L3 data, L2 represents L1-L2 data, and L3 represents L2-L3 data.