Exit command – Dell Metered PDU LCD User Manual
Page 58
58
|
Serial Interface Operation
Retrieve the present current threshold for all rPDU phases (L1, L2, or L3)
rPDU>current threshold
Example
rPDU>current threshold
rPDU: Threshold Phase X 24.0:18.0:0.0
rPDU: Threshold Phase Y 22.0:17.0:2.0
rPDU: Threshold Phase Z 22.0:17.0:2.0
Retrieve the present current threshold for a specific rPDU phase (L1, L2, or L3)
(Three-phase rPDUs only)
rPDU>current threshold [X|Y|Z]
Example
rPDU>current threshold X
rPDU: Threshold Phase X 24.0:18.0:0.0
exit command
Use this command to log out and exit the serial interface for the rPDU.
Usage
<rPDU>exit
Log out of the serial CLI
rPDU>exit
Example
rPDU>exit
Dell
<rPDU model>
Copyright (c) 2010 Dell Corporation
DELL DPI 00.01.0028 August 5, 2010
Username:
where:
<rPDU model> = Dell model part number. See Table 14 for valid values.
Table 14. <rPDU model> Value Descriptions
<rPDU model> Value
<rPDU model> Descriptions
1X98J
PDU 208V 17.3KW 3PH 6C13 12C19 (DELLM0001)
7P35N
PDU 200V 17.3KW 3PH 6C13 12C19 (DELLM001A)
09FG8
PDU 415V 22KW 3PH 18C13 12C19 (DELLM0002)
4J1C2
PDU 415V 11KW 3PH 21C13 6C19 (DELLM0003)
XX5T6
PDU 208V 17.3KW 3PH 42C13 (DELLM0004)
RXKCH
PDU 200V 17.3KW 3PH 42C13 (DELLM004A)
K5YYY
PDU 415V 22KW 3PH 42C13 (DELLM0005)
2CM2K
PDU 208V 17.3KW 3PH 48C13 (DELLM0006)
C0G4D
PDU 415V 22KW 3PH 48C13 (DELLM0007)