Dell Dimension 4600C - Manual (Page 19)

Setting Up and Using Your Computer
19
6 Click the appropriate option under How do you want to connect to the Internet?, and then
click Next.
7 Use the setup information provided by your ISP to complete the setup.
If you are having problems connecting to the Internet, see "E-Mail, Modem, and Internet
Problems" on page 27. If you cannot connect to the Internet but have successfully connected in the
past, the ISP might have a service outage. Contact your ISP to check the service status, or try
connecting again later.
Copying CDs and DVDs
NOTE:
Ensure that you follow all copyright laws when you create CDs.
This section applies only to computers that have a CD-R, CD-RW, DVD+RW, DVD+R, or
DVD/CD-RW combo drive.
The following instructions show how to make an exact copy of a CD or DVD. You can also use
Sonic RecordNow for other purposes, including creating CDs from audio files on your computer
and creating MP3 CDs. For instructions, see the Sonic RecordNow documentation that came with
your computer. Open Sonic RecordNow, click the question mark icon in the upper-right corner of
the window, and click RecordNow Help or RecordNow Tutorial.
How to Copy a CD or DVD
NOTE:
If you have a DVD/CD-RW combo drive and you experience recording problems, check for
available software patches at the Sonic support website at support.sonic.com.
NOTE:
Most commercial DVDs have copyright protection and cannot be copied using
Sonic RecordNow.
1 Click the Start button, point to All Programs → Sonic → RecordNow! → RecordNow!.
2 Click either the audio tab or the data tab, depending on the kind of CD you are planning
to copy.
3 Click Exact Copy.
4 To copy the CD or DVD:
•
If you have one CD or DVD drive, ensure that the settings are correct and click Copy.
The computer reads your source CD or DVD and copies it to a temporary folder on your
computer hard drive.
When prompted, insert a blank CD or DVD into the CD or DVD drive and click OK.
• If you have two CD or DVD drives, select the drive into which you have inserted your
source CD or DVD and click Copy. The computer copies the data on the CD or DVD to
the blank CD or DVD.
Once you have finished copying the source CD or DVD, the CD or DVD that you have
created automatically ejects.