Dell Dimension 4600C - Manual (Page 62)

62
Adding Parts
www
.dell.com | support.dell.com
Adding PC Cards (Optional)
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
You can add PC Cards to computers with integrated PC Card connectors.
PC Card Types
NOTE:
"Type" of card refers to its thickness, not its functionality.
The PC Card slot has two connectors that support the following four combinations of cards.
NOTE:
Your computer is designed for either 5-V or 3.3-V 16-bit PCMCIA cards. Some cards are keyed for
3.3 V only but will not fit into the PC slot. Cards are keyed to prevent incorrect insertion into the slot.
If card orientation is not clear, see the documentation supplied with the card.
• A single Type I or Type II card (using either the upper or lower PC Card connector)
• One Type I card and one Type II card (using either connector)
• Two Type I cards or two Type II cards
• One Type III card (using the lower connector)
Both PC Card connectors support extended PC Cards.